![]() ![]() dev/md9 on /mnt/HDA_ROOT type ext3 (rw,data=ordered) # echo "Base Directory: $(dirname $(getcfg -f /etc/config/smb.conf Public path))"Įcho "NAS IP address: $(ifconfig $(getcfg network 'Default GW Device') | grep ad dr: | awk '' | cut -d: -f2)"įilesystem Size Used Available Use% Mounted on ![]() ![]() # echo "Workgroup: $(getcfg system workgroup)"Įcho "Base Directory: $(dirname $(getcfg -f /etc/config/smb.conf Public path))" # echo "Firmware: $(getcfg system version) Build $(getcfg system 'Build Number')"Įcho "Workgroup: $(getcfg system workgroup)" Any suggestions?Ĭode: Select all # echo "NAS Model: $(getsysinfo model)" I've ran re-claim freespace and file system check to no avail. If I change the freespace alert to 60%, the LED display at the front will beep and display error volume full where in actual fact the entire volume is only 21% used. This is a brand new TS-470 Pro with firmware 4.1. While the storage pool is showing 8.16Tb capacity, allocated 1.92Tb and freesize is 6.24Tb Under volume view, the data volume alias is again showing 2.64Tb capacity and 990.94Gb free. under storage manager the cylinder volume is showing 1.7 used out of 2.6TB while storage pool view is showing the correct volume size 8.16Tb with roughly 21% used. Re-build was successful, except now the followings Now the correct total raid 5 volume is 8.1Tb formatted. Used storage manager - storage pool and did an online migration from raid 1 to raid 5. Added two additional Seagate 3TB Nas drives, the drives were two days later Therefore total storage formatted volume is 2.6Tb. Originally raided x2 Seagate 3TB Nas drives as raid 1 config. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |